Select Country:

Home
About Us
Downloads
- Request Price List
Representatives
Resources
- FAQs
Contact
- CASL Consent

Navigation
TRAPS
Traps:

P-Traps can be found at almost any fixture that drains water and are designed to prevent hazardous sewer gases from entering the building. A P-Trap is comprised of a curved “trap” called a J-Bend and a drain pipe called a Wall Bend. The Tailpiece on the Lavatory Drain fits into the P-Trap J-Bend, connecting to the Wall Bend, which then enters the wall. They are available with or without cleanout plugs. If one with a cleanout plug is installed it can be cleaned without removing and installing a new trap.

S-Traps are also used to prevent hazardous sewer gases from entering buildings, and are designed to drain into plumbing below the floor for installations where there is no access to plumbing directly behind the wall.

Because of their shape, J-Bends retain a small amount of water after the fixture’s use. This water in the trap creates a seal that prevents sewer gas from passing from the drain pipes back into the occupied space of a building or home.

Vanity Traps are P-Traps which feature an extra-long (15”) Wall Bend to accommodate deeper Vanity installations.

“OS&B® Traps are warranted for 5 years, from date of purchase, against workmanship and/or material defects. Buy Quality. Buy OS&B® Traps for your next plumbing project.”

Tubular P-Traps

Cast P-Traps

Vanity Traps 15” Wall Bend

S-Traps

Repair Traps

Decorative T-Traps

J-Bends

Tubular P-Traps

Cast P-Traps

Repair Traps

Sink Traps-Cast Elbow

J-Bends
LAV DRAINS

Lav Drains:

Design. Innovation. Selection.

With trend setting innovations like our Clicker® Closure mechanism and our Daisy™ Grid Drain, OS&B® has set a new standard in Lavatory (Lav) Drain technology. OS&B® has all of your Lav Drain needs covered with a complete selection available in a variety of materials, configurations, sizes and finishes.

Clicker®

Mechanical Pop-up

Open Grid

Hooded Dome

Plug & Chain

Wheelchair Accessible
TUBULAR

1-1/2” Tubular Traps

Continuous Wastes

Continuous Waste Arms

Extension Tubes

Sink Tailpieces

Flanged (T.O.E.) Tailpieces

Dishwasher Tailpieces

1-1/2” Plastic Repair Connectors

1-1/2” Dishwasher Bushings

Urinal Tailpieces

Reducing Tailpieces

Threaded Tubes

Double Slip Repair Connectors

Waste Connectors

Sink Funnel/Standing Overflow
WASTE & OVERFLOW

Waste & Overflows:

Design. Innovation. Selection.

With over 40 years of experience manufacturing Waste & Overflows (bath drains), and supplying to the Plumbing Trade throughout North America and to OEM suppliers around the world, OS&B® is known as a true innovator and the leading manufacturer of bath Waste & Overflows. First to market with such unique and innovative features as the Angle Adapter, Spin-on Tie Plate, Corrugated Overflow Tube on Offset Brass Waste & Overflows and our new SlideOn™ Faceplate, all designed to simplify and speed up installation. With a complete selection available in a variety of materials, configurations, sizes and finishes, OS&B® has all of your bath drain needs covered.

Select your Bath Drain by Closure type:

Cable-Drive®

Clicker®

Lift & Turn

Plug & Chain

Push-Pull

Tip-Toe

Twirl™

Bath Tub Drain Trim Update Kits
TESTABLE W/O

Testable bath drain Rough-in and Trim Program

Introducing our Testable bath drain Rough-in and Trim Program (Sold separately). Rough-ins available in ABS, PVC and Brass Offset and Direct styles.

Trim Kits available with Bell, Square or Round shaped SlideOn™ Faceplate styles and in Clicker®, Twirl™ or Plug & Chain closure mechanisms. Choose from a selection of popular finishes including new Matte Black (available in Clicker® Trim Kits only).

Your job just got easier.™

Testable Rough-ins

Trim Kits
SUPPLIES
- Braided FLEX
- SS Corrugated
Faucet - 1/2” IPS x 3/8” Comp

Coupling - 1/2” IPS x 1/2” IPS

Dishwasher - 3/8” Comp x 3/8” Comp

Toilet Connector 7/8” Ballcock x 3/8” Comp

Single Lever Faucet Connector - 3/8” COMP X 3/8” COMP

Washing Machine - 3/4” x 3/4” FIP

Falcon SS Corrugated WC - 3/4”

Falcon SS Corrugated WC - 1”

Falcon SS Corrugated WC - 1-1/4”

Falcon SS Corrugated WC

Falcon SS Corrugated WC - 1-1/2”

Falcon SS Corrugated WC - 2”

Falcon SS Corrugated WC - 7/16”

Falcon SS Corrugated WC - 1/2”

Falcon SS Corrugated WC - Toilet Connector
BATH WASTE KITS

Bath Waste Kits

Our Bath Waste Kits are specifically designed for Bath Tubs with an integral Overflow or without Overflow.

Available with a Brass or ABS fitting, and in Clicker® or Twirl™ closure mechanisms. Featuring a Strainer with integral Overflow holes and unique vertical Weeping Channels (prevents buildup at Overflow Holes). Choose from a selection of popular finishes.

Your job just got easier.™

CLICKER®
TUB & SHOWER/WC
- Shower
- Tub
- WC
1” Shower Rods

Side Discharge Shower Drains

1” Shower Rod Kits and Flanges

Shower Curtain Accessories

1/2” Shower Arms

1/2” Shower Arm Flanges

Shower Drains for Molded Bases

Testable Shower Drains for Preformed Shower Bases

Shower Pan Drains

Shower Head, Arm & Flange

Tub Spouts - Slip Connect

Freestanding Tub Drains

W/C Closet Bolt Nuts - Open Head

W/C Closet Washers

W/C Premium Closet Bolts

W/C Closet Bolts

W/C Closet Spuds

W/C 2” Closet Tank Elbows

W/C Toilet Flange Extension Kits
ETC./MISC

Automatic Plumbing Vent

Check Valves

Air Admittance Valves

Floor Drains

Drain Pans

Bead Chains & Couplings

Nuts

Escutcheons/Flanges

Rings & Washers

Laundry Faucets

Washing Machine Boxes

Ice Maker Boxes

Trap Seal Primers - Hose Barbs
STRAINERS
OS&B® Has The Right Strainer For The Right Application

Warranted for 5 years, from date of purchase, against workmanship and/or material defects only, choose OS&B® strainers for any commercial or residential development. Our strainers are suitable for a variety of applications from the commercial restaurant to the family home.

Commercial

Duplex

Kitchen

Replacement Baskets
Kitchen Types:

Search:

Home › TUB & SHOWER/WC › WC › W/C Toilet Flange Extension Kits

TUB & SHOWER/WC

WC (W/C Toilet Flange Extension Kits)

Displaying 1 to 1 of 1 products found.

Page:

	Product Code	GA	Size	Length	Cert.	CTN Qty.
	2128-CFX	-	-	-	-	12

Page:

Stay Informed

Find

Contact

Sitemap

PRODUCTS

Traps
Lav Drains
Tubular
Waste & Overflow
Testable W/O
Supplies
Bath Waste Kits
Tub & Shower/WC
Etc./Misc
Strainers

DOWNLOADS

Product Bulletins
Request Price List
Specification Sheets
Installation

CUSTOMER SERVICE

Terms & Conditions
Warranty
Representatives
Trademarks & Patents
Environmental Policies
Sitemap

CUSTOMER CARE

Sales Information – sales@osb.ca
Customer Service – customerservice@osb.ca

OAKVILLE STAMPING & BENDING

2200 Speers Road, Unit C
Oakville, Ontario
Canada L6L 2X8

Phone: 1.905.827.0320
Toll Free: 1.877.314.6040
Fax: 1.905.827.6375
Toll Free: 1.877.827.6040

OS&B® is the leading supplier of plumbing parts to the trade only. ©2017. All rights reserved.