ISLAND TUB DRAINS
2 Piece Island Tub Drains
Model ITD25
FRZERO FR PVC Island Tub Drain™ Testable Rough-in for Freestanding Tubs
![hidden tab](https://www.osb.ca/images/admin/icons/icon-easytab-arrow.jpg)
Description
Install a Freestanding bath tub in minutes with the Island Tub Drain®. No muss, no fuss, no kidding.
- Meets flame and smoke requirements of CAN/ULC S102.2-10 for non-combustible buildings (use approved PVC primer and solvent cement to make joints)
- Will not support combustion in the presence of an ignition source
- Newly redesigned Asymmetrical Deck Flange makes installation in tight spaces easier
- Allows for freestanding Tub location to be defined at rough-in
- Designed to be installed in a 8" (1-1/2" outlet) or 10" (2" outlet recommended) joist space
- Allows for freestanding Tub to be installed over finished floor
- Built-in snap-off Test Cap allows for water/air/smoke testing
- NOTE: Island Tub Drain® IS NOT FOR USE with liquid applied or sheet membranes
- NOTE: Island Tub Drain® MUST BE INSTALLED in a dry area with no potential of water contact
- Island Tub Drain® is Patented (Canadian Patent 2,813,010 & US Patent 9,551,138)
Specifications
- Material:
- FR-PVC
- Clean Out?
- NA
- Snap-off Test Plug allows for water/air/smoke testing (Rated to 30psi)
- 18 Gauge Epoxy coated Metal Deck Plate with holes to lock in Thinset
- ITD25 is a Freestanding Tub Rough-in (install before tile installation)
- Designed to be installed in a 8" / 10" joist space with 1-1/2" / 2" P-Trap
INCLUDES:
- 2 Brass Tailpieces (Fine Thread and Flanged)
- FR PVC Adapter Kit (attaches ITD25 to FR PVC Bath Waste)
- Island Drain assembly
- Mortar/Tile guard
- Cutting Template
Downloads
Certification
![cCSAus meets UPC](https://www.osb.ca/images/admin/icons/icon-cCSAus-UPC.gif)
![QAI Certification](https://www.osb.ca/images/admin/icons/icon-QAI.gif)
![Model ITD25 ITD25](https://www.osb.ca/products/island-tub-drains/images/ITD25alone.png)